Skip to content

Image to Clicker Generator

7 credits

Choose a picture or upload your own and get a picture-shaped keychain clicker: a multi-colour cap on one standard mechanical keyboard switch (cross stem) in a printed base.

Choose a picture

Picture
Selected pictureCapybara

Size and style

mm

The longest side of the picture cap. The base is 1.6 mm bigger all round.

Picture style

Raised: the picture's colours stand 2 mm proud of the cap. Flat: they are inlaid flush in the cap's top.

Switch

mm

Moves the switch under the cap. 0 = the automatic point (deepest inside the picture).

mm

Moves the switch under the cap. 0 = the automatic point (deepest inside the picture).

Free fit test — check your switch first. A plain round mini clicker (cap + base) with the same switch pocket. Print the cap and the base as they are laid out — no supports needed.

Keyring

Keyring
%

Moves the keyring along the edge of the base. 0 = the automatic point (near the top).

Outline

On: the picture's outline colour runs round the edge of the cap. Off: the colours next to it fill the edge instead (same cap shape).

Colours

Picture colours

Auto keeps the picture's main colours (up to 8). Pick a number to choose yourself — 1 makes the whole picture one colour.

Picture colour 1From the picture
Picture colour 2From the picture
Picture colour 3From the picture
Picture colour 4From the picture
Picture colour 5From the picture
Picture colour 6From the picture
Picture colour 7From the picture
Picture colour 8From the picture
Picture colour 9From the picture
Picture colour 10From the picture
Picture colour 11From the picture
Picture colour 12From the picture
Picture colour 13From the picture
Picture colour 14From the picture
Picture colour 15From the picture
Picture colour 16From the picture
Base colour · Black

Preview colours are for visualisation only. After downloading your file, you can assign your actual filament colours in your slicer.

You need one standard mechanical keyboard switch (cross stem, normal height — low-profile switches won't fit). Cut off the switch's two metal pins first.

How to put it together: 1) Cut both metal pins of the switch off flush — keep the plastic centre post. 2) Press the switch into the base until it clicks. 3) Push the cap onto the switch stem.

Creating your model…

Your model will be ready in a moment

3MF Recommended

Works in all modern slicers.

STL

The classic 3D printing format.

Print the cap and the base as they are laid out — no supports needed.

Safety note: Small items can be a choking hazard. Not a toy — keep away from young children.

Re-downloads are free.