Skip to content

Image to Charm Generator

2 credits

Choose a picture or upload your own and turn it into a flat, multi-colour bracelet charm with a bead-style hole straight through.

Choose a picture

Picture
Selected pictureCapybara
Style

Engraved prints in one filament: the picture's outline and dark parts are cut 0.6 mm into the top.

Size

mm

The longest side of the charm. Bigger charms keep more detail.

mm

How thick the charm is. The bead hole runs through the middle.

Detail

Standard works on a 0.4 mm nozzle. For the tiniest details, choose Fine and print with a 0.2 mm nozzle.

Bead hole

Hole direction
mm

The hole's diameter. It keeps 1.5 mm of charm all round, so a thin or small charm gets a smaller hole.

Not sure about the fit? Download a free fit test — a plain one-colour piece with the same hole.

Colours

Picture colours

Auto keeps the picture's main colours (up to 8). Pick a number to choose yourself — 1 makes the whole picture one colour.

Picture colour 1From the picture
Picture colour 2From the picture
Picture colour 3From the picture
Picture colour 4From the picture
Picture colour 5From the picture
Picture colour 6From the picture
Picture colour 7From the picture
Picture colour 8From the picture
Picture colour 9From the picture
Picture colour 10From the picture
Picture colour 11From the picture
Picture colour 12From the picture
Picture colour 13From the picture
Picture colour 14From the picture
Picture colour 15From the picture
Picture colour 16From the picture

Preview colours are for visualisation only. After downloading your file, you can assign your actual filament colours in your slicer.

Creating your model…

Your model will be ready in a moment

3MF Recommended

Works in all modern slicers.

STL

The classic 3D printing format.

Safety note: Small items can be a choking hazard. Not a toy — keep away from young children.

Re-downloads are free.